![]() If your CPU does not support the frequencies of the XMP profile, your RAM will only run at the maximum speed supported by the CPU.Į.g. ![]() ![]() If you do not manually turn on the XMP profile, your RAM will run at the default standard speed, which will most likely be 2133 MHz if you have a DDR4 RAM kit and 4800 MHz if you have DDR5. If your CPU and motherboard support the frequencies of the XMP profile that the manufacturer has created for your RAM kit, you have to manually select and turn on the XMP profile in your BIOS to run the RAM at the frequency that was advertised. frequencies) that the RAM can safely run at if those frequencies are supported by the other components of the PC-chiefly the CPU and motherboard. ![]() XMP (eXtreme Memory Profile) are manufacturer verified overclocks (i.e. What Are XMP Profiles?īefore we talk about why your RAM might not be running at the frequencies that were advertised, we need to talk about how your RAM runs at those speeds in the first place.ĭon’t worry, I won’t get too technical, we have our other article explaining XMP in-depth for that. So I’m going to explain why that might be, and go over what you can do to make sure that your RAM runs at full speed. It should be pretty simple, right? If you bought a kit of 3200 MHz memory, the modules should run at 3200 MHz when you install them.īut unless you actually set them up to run at that frequency- assuming your other hardware is compatible-they’re only ever going to run at far lower frequencies-probably around 2133 MHz.
0 Comments
Leave a Reply. |